使用kubeadm搭建kubernetes1.10集群

使用kubeadm搭建kubernetes1.10集群

标签: kubernetes   kubeadm  

kubeadmKubernetes官方提供的用于快速安装 Kubernetes 集群的工具,通过将集群的各个组件进行容器化安装管理,通过kubeadm的方式安装集群比二进制的方式安装要方便不少,但是目录kubeadm还处于beta状态,还不能用于生产环境,Using kubeadm to Create a Cluster文档中已经说明kubeadm将会很快能够用于生产环境了。

所以现在来了解下kubeadm的使用方式的话还是很有必要的,对于现阶段想要用于生产环境的,建议还是参考我们前面的文章:手动搭建高可用的kubernetes 集群或者视频教程

环境

我们这里准备两台Centos7的主机用于安装,后续节点可以根究需要添加即可:

$ cat /etc/hosts
10.151.30.57 ydzs-master1
10.151.30.62 evjfaxic

禁用防火墙:

$ systemctl stop firewalld
$ systemctl disable firewalld

禁用SELINUX:

$ setenforce 0
$ cat /etc/selinux/config
SELINUX=disabled

创建/etc/sysctl.d/k8s.conf文件,添加如下内容:

net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1

执行如下命令使修改生效:

$ modprobe br_netfilter
$ sysctl -p /etc/sysctl.d/k8s.conf

镜像

如果你的节点上面有科学上网的工具,可以忽略这一步,我们需要提前将所需的gcr.io上面的镜像下载到节点上面,当然前提条件是你已经成功安装了docker

master节点,执行下面的命令:

docker pull cnych/kube-apiserver-amd64:v1.10.0
docker pull cnych/kube-scheduler-amd64:v1.10.0
docker pull cnych/kube-controller-manager-amd64:v1.10.0
docker pull cnych/kube-proxy-amd64:v1.10.0
docker pull cnych/k8s-dns-kube-dns-amd64:1.14.8
docker pull cnych/k8s-dns-dnsmasq-nanny-amd64:1.14.8
docker pull cnych/k8s-dns-sidecar-amd64:1.14.8
docker pull cnych/etcd-amd64:3.1.12
docker pull cnych/flannel:v0.10.0-amd64
docker pull cnych/pause-amd64:3.1

docker tag cnych/kube-apiserver-amd64:v1.10.0 k8s.gcr.io/kube-apiserver-amd64:v1.10.0
docker tag cnych/kube-scheduler-amd64:v1.10.0 k8s.gcr.io/kube-scheduler-amd64:v1.10.0
docker tag cnych/kube-controller-manager-amd64:v1.10.0 k8s.gcr.io/kube-controller-manager-amd64:v1.10.0
docker tag cnych/kube-proxy-amd64:v1.10.0 k8s.gcr.io/kube-proxy-amd64:v1.10.0
docker tag cnych/k8s-dns-kube-dns-amd64:1.14.8 k8s.gcr.io/k8s-dns-kube-dns-amd64:1.14.8
docker tag cnych/k8s-dns-dnsmasq-nanny-amd64:1.14.8 k8s.gcr.io/k8s-dns-dnsmasq-nanny-amd64:1.14.8
docker tag cnych/k8s-dns-sidecar-amd64:1.14.8 k8s.gcr.io/k8s-dns-sidecar-amd64:1.14.8
docker tag cnych/etcd-amd64:3.1.12 k8s.gcr.io/etcd-amd64:3.1.12
docker tag cnych/flannel:v0.10.0-amd64 quay.io/coreos/flannel:v0.10.0-amd64
docker tag cnych/pause-amd64:3.1 k8s.gcr.io/pause-amd64:3.1

可以将上面的命令保存为一个shell脚本,然后直接执行即可。这些镜像是在master节点上需要使用到的镜像,一定要提前下载下来。

其他Node,执行下面的命令:

docker pull cnych/kube-proxy-amd64:v1.10.0
docker pull cnych/flannel:v0.10.0-amd64
docker pull cnych/pause-amd64:3.1
docker pull cnych/kubernetes-dashboard-amd64:v1.8.3
docker pull cnych/heapster-influxdb-amd64:v1.3.3
docker pull cnych/heapster-grafana-amd64:v4.4.3
docker pull cnych/heapster-amd64:v1.4.2
docker pull cnych/k8s-dns-kube-dns-amd64:1.14.8
docker pull cnych/k8s-dns-dnsmasq-nanny-amd64:1.14.8
docker pull cnych/k8s-dns-sidecar-amd64:1.14.8

docker tag cnych/flannel:v0.10.0-amd64 quay.io/coreos/flannel:v0.10.0-amd64
docker tag cnych/pause-amd64:3.1 k8s.gcr.io/pause-amd64:3.1
docker tag cnych/kube-proxy-amd64:v1.10.0 k8s.gcr.io/kube-proxy-amd64:v1.10.0

docker tag cnych/k8s-dns-kube-dns-amd64:1.14.8 k8s.gcr.io/k8s-dns-kube-dns-amd64:1.14.8
docker tag cnych/k8s-dns-dnsmasq-nanny-amd64:1.14.8 k8s.gcr.io/k8s-dns-dnsmasq-nanny-amd64:1.14.8
docker tag cnych/k8s-dns-sidecar-amd64:1.14.8 k8s.gcr.io/k8s-dns-sidecar-amd64:1.14.8

docker tag cnych/kubernetes-dashboard-amd64:v1.8.3 k8s.gcr.io/kubernetes-dashboard-amd64:v1.8.3
docker tag cnych/heapster-influxdb-amd64:v1.3.3 k8s.gcr.io/heapster-influxdb-amd64:v1.3.3
docker tag cnych/heapster-grafana-amd64:v4.4.3 k8s.gcr.io/heapster-grafana-amd64:v4.4.3
docker tag cnych/heapster-amd64:v1.4.2 k8s.gcr.io/heapster-amd64:v1.4.2

上面的这些镜像是在Node节点中需要用到的镜像,在join节点之前也需要先下载到节点上面。

安装 kubeadm、kubelet、kubectl

在确保docker安装完成后,上面的相关环境配置也完成了,对应所需要的镜像(如果可以科学上网可以跳过这一步)也下载完成了,现在我们就可以来安装kubeadm了,我们这里是通过指定yum源的方式来进行安装的:

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg
        https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
EOF

当然了,上面的yum源也是需要科学上网的,如果不能科学上网的话,我们可以使用阿里云的源进行安装:

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
        http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

目前阿里云的源最新版本已经是1.10版本,所以可以直接安装。yum源配置完成后,执行安装命令即可:

$ yum makecache fast && yum install -y kubelet kubeadm kubectl

正常情况我们可以都能顺利安装完成上面的文件。

由于我之前安装的时候最新版本是1.10版本,所以我上面对应的镜像都是1.10版本对应的镜像,现在阿里云对应的版本最新是1.10.3了,所以需要安装指定的版本,不然镜像会对应不上的

$ yum makecache fast && yum install -y kubelet-1.10.0-0 kubeadm-1.10.0-0 kubectl-1.10.0-0

配置 kubelet

安装完成后,我们还需要对kubelet进行配置,因为用yum源的方式安装的kubelet生成的配置文件将参数--cgroup-driver改成了systemd,而dockercgroup-drivercgroupfs,这二者必须一致才行,我们可以通过docker info命令查看:

$ docker info |grep Cgroup
Cgroup Driver: cgroupfs

修改文件kubelet的配置文件/etc/systemd/system/kubelet.service.d/10-kubeadm.conf,将其中的KUBELET_CGROUP_ARGS参数更改成cgroupfs

Environment="KUBELET_CGROUP_ARGS=--cgroup-driver=cgroupfs"

另外还有一个问题是关于交换分区的,之前我们在手动搭建高可用的kubernetes 集群一文中已经提到过,Kubernetes从1.8开始要求关闭系统的 Swap ,如果不关闭,默认配置的kubelet将无法启动,我们可以通过 kubelet 的启动参数--fail-swap-on=false更改这个限制,所以我们需要在上面的配置文件中增加一项配置(在ExecStart之前):

Environment="KUBELET_EXTRA_ARGS=--fail-swap-on=false"

当然最好的还是将swap给关掉,这样能提高kubelet的性能。修改完成后,重新加载我们的配置文件即可:

$ systemctl daemon-reload

集群安装

初始化

到这里我们的准备工作就完成了,接下来我们就可以在master节点上用kubeadm命令来初始化我们的集群了:

$ kubeadm init --kubernetes-version=v1.10.0 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=10.151.30.57

命令非常简单,就是kubeadm init,后面的参数是需要安装的集群版本,因为我们这里选择flannel作为 Pod 的网络插件,所以需要指定–pod-network-cidr=10.244.0.0/16,然后是apiserver的通信地址,这里就是我们master节点的IP 地址。执行上面的命令,如果出现 running with swap on is not supported. Please disable swap之类的错误,则我们还需要增加一个参数–ignore-preflight-errors=Swap来忽略swap的错误提示信息:

$ kubeadm init \
   --kubernetes-version=v1.10.0 \
   --pod-network-cidr=10.244.0.0/16 \
   --apiserver-advertise-address=10.151.30.57 \
   --ignore-preflight-errors=Swap
[init] Using Kubernetes version: v1.10.0
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks.
    [WARNING FileExisting-crictl]: crictl not found in system path
Suggestion: go get github.com/kubernetes-incubator/cri-tools/cmd/crictl
[preflight] Starting the kubelet service
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [ydzs-master1 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.151.30.57]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated etcd/ca certificate and key.
[certificates] Generated etcd/server certificate and key.
[certificates] etcd/server serving cert is signed for DNS names [localhost] and IPs [127.0.0.1]
[certificates] Generated etcd/peer certificate and key.
[certificates] etcd/peer serving cert is signed for DNS names [ydzs-master1] and IPs [10.151.30.57]
[certificates] Generated etcd/healthcheck-client certificate and key.
[certificates] Generated apiserver-etcd-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf"
[controlplane] Wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] Wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] Wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] Waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests".
[init] This might take a minute or longer if the control plane images have to be pulled.
[apiclient] All control plane components are healthy after 22.007661 seconds
[uploadconfig] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[markmaster] Will mark node ydzs-master1 as master by adding a label and a taint
[markmaster] Master ydzs-master1 tainted and labelled with key/value: node-role.kubernetes.io/master=""
[bootstraptoken] Using token: 8xomlq.0cdf2pbvjs2gjho3
[bootstraptoken] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: kube-dns
[addons] Applied essential addon: kube-proxy

Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join 10.151.30.57:6443 --token 8xomlq.0cdf2pbvjs2gjho3 --discovery-token-ca-cert-hash sha256:92802317cb393682c1d1356c15e8b4ec8af2b8e5143ffd04d8be4eafb5fae368

上面的信息记录了kubeadm初始化整个集群的过程,生成相关的各种证书、kubeconfig文件、bootstraptoken等等,后边是使用kubeadm join往集群中添加节点时用到的命令,下面的命令是配置如何使用kubectl访问集群的方式: mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config 最后给出了将节点加入集群的命令:

kubeadm join 10.151.30.57:6443 --token 8xomlq.0cdf2pbvjs2gjho3 --discovery-token-ca-cert-hash sha256:92802317cb393682c1d1356c15e8b4ec8af2b8e5143ffd04d8be4eafb5fae368

我们根据上面的提示配置好kubectl后,就可以使用kubectl来查看集群的信息了:

$ kubectl get cs
NAME                 STATUS    MESSAGE              ERROR
scheduler            Healthy   ok
controller-manager   Healthy   ok
etcd-0               Healthy   {"health": "true"}
$ kubectl get csr
NAME                                                   AGE       REQUESTOR                 CONDITION
node-csr-8qygb8Hjxj-byhbRHawropk81LHNPqZCTePeWoZs3-g   1h        system:bootstrap:8xomlq   Approved,Issued
$ kubectl get nodes
NAME           STATUS    ROLES     AGE       VERSION
ydzs-master1   Ready     master    3h        v1.10.0

如果你的集群安装过程中遇到了其他问题,我们可以使用下面的命令来进行重置:

$ kubeadm reset
$ ifconfig cni0 down && ip link delete cni0
$ ifconfig flannel.1 down && ip link delete flannel.1
$ rm -rf /var/lib/cni/

安装 Pod Network

接下来我们来安装flannel网络插件,很简单,和安装普通的POD没什么两样:

$ wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
$ kubectl apply -f  kube-flannel.yml
clusterrole.rbac.authorization.k8s.io "flannel" created
clusterrolebinding.rbac.authorization.k8s.io "flannel" created
serviceaccount "flannel" created
configmap "kube-flannel-cfg" created
daemonset.extensions "kube-flannel-ds" created

另外需要注意的是如果你的节点有多个网卡的话,需要在kube-flannel.yml中使用--iface参数指定集群主机内网网卡的名称,否则可能会出现dns无法解析。flanneld启动参数加上--iface=<iface-name>

args:
- --ip-masq
- --kube-subnet-mgr
- --iface=eth0

安装完成后使用kubectl get pods命令可以查看到我们集群中的组件运行状态,如果都是Running状态的话,那么恭喜你,你的master节点安装成功了。

$ kubectl get pods --all-namespaces
NAMESPACE     NAME                                   READY     STATUS    RESTARTS   AGE
kube-system   etcd-ydzs-master1                      1/1       Running   0          10m
kube-system   kube-apiserver-ydzs-master1            1/1       Running   0          10m
kube-system   kube-controller-manager-ydzs-master1   1/1       Running   0          10m
kube-system   kube-dns-86f4d74b45-f5595              3/3       Running   0          10m
kube-system   kube-flannel-ds-qxjs2                  1/1       Running   0          1m
kube-system   kube-proxy-vf5fg                       1/1       Running   0          10m
kube-system   kube-scheduler-ydzs-master1            1/1       Running   0          10m

kubeadm初始化完成后,默认情况下Pod是不会被调度到master节点上的,所以现在还不能直接测试普通的Pod,需要添加一个工作节点后才可以。

添加节点

同样的上面的环境配置、docker 安装、kubeadmin、kubelet、kubectl 这些都在Node(10.151.30.62)节点安装配置好过后,我们就可以直接在 Node 节点上执行kubeadm join命令了(上面初始化的时候有),同样加上参数--ignore-preflight-errors=Swap:

$ kubeadm join 10.151.30.57:6443 --token 8xomlq.0cdf2pbvjs2gjho3 --discovery-token-ca-cert-hash sha256:92802317cb393682c1d1356c15e8b4ec8af2b8e5143ffd04d8be4eafb5fae368 --ignore-preflight-errors=Swap
[preflight] Running pre-flight checks.
    [WARNING Swap]: running with swap on is not supported. Please disable swap
    [WARNING FileExisting-crictl]: crictl not found in system path
Suggestion: go get github.com/kubernetes-incubator/cri-tools/cmd/crictl
[discovery] Trying to connect to API Server "10.151.30.57:6443"
[discovery] Created cluster-info discovery client, requesting info from "https://10.151.30.57:6443"
[discovery] Requesting info from "https://10.151.30.57:6443" again to validate TLS against the pinned public key
[discovery] Cluster info signature and contents are valid and TLS certificate validates against pinned roots, will use API Server "10.151.30.57:6443"
[discovery] Successfully established connection with API Server "10.151.30.57:6443"

This node has joined the cluster:
* Certificate signing request was sent to master and a response
  was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the master to see this node join the cluster.

我们可以看到该节点已经加入到集群中去了,然后我们把master节点的~/.kube/config文件拷贝到当前节点对应的位置即可使用kubectl命令行工具了。

$ kubectl get nodes
NAME           STATUS    ROLES     AGE       VERSION
evjfaxic       Ready     <none>    1h        v1.10.0
ydzs-master1   Ready     master    3h        v1.10.0

到这里就算我们的集群部署成功了,接下来就可以根据我们的需要安装一些附加的插件,比如 Dashboard、Heapster、Ingress-Controller等等,这些插件的安装方法就和我们之前手动安装集群的方式方法一样了,这里就不在重复了,有问题可以在下面留言讨论。

kubeadm-dashboard

参考资料

下面是基于1.9版本手动搭建高可用Kubernetes集群的视频教程,对视频感兴趣的同学可以观看视频: 视频教程

扫描下面的二维码(或微信搜索k8s技术圈)关注我们的微信公众帐号,在微信公众帐号中回复 加群 即可加入到我们的 kubernetes 讨论群里面共同学习。 qrcode

「真诚赞赏,手留余香」

阳明

请我喝杯咖啡?

使用微信扫描二维码完成支付

相关文章